Deck Design - Why Firm Foundations Are Essential

[ad_1] Preparing a deck design for your backyard is all the rage as a home improvement project for this summer, however there is great temptation to build a pallet like structure that just sits on the ground outside your back door. Yes there are many ways to prepare the ground so that an unconnected deck design structure will sit level to the ground, for example by using concrete slabs in four corners... but it's still just a big pallet sitting on the ground and the slightest soil erosion below will result in a rocky deck!. The only way to make a deck design that you can be proud of, that will stand the test of storms and wind AND that you can build onto as years go by, is to prepare firm LEVEL foundations before you start to build up. A ground level deck design should not just sit flat on the ground, its important to raise the deck frame off the ground to allow for drainage AND to protect the wood, however, keep in mind that the top level of your deck should not be higher than the entrance to your home - so that the rain doesn't run off your deck design and through your back door. The importance of anchoring your deck design at the very start of your project cannot be over emphasized and are an essential requirement for:

• Complying with planning permits for your area.
• Hopefully improving the value of your home.
• Quality workmanship will improve the usefulness of spaces in and around your home.
• Adding value to the time you spent doing the work -it's much more worthwhile when the job is done properly.
• Allowing you to extend your decking later - for example if you want to add an extension for a BBQ area or a step up to encompass your new hot tub with deck surround...

Your First Step in preparing the ground for your deck design foundations will be to find out where any underground pipes extend out into your backyard, you don't want to dig into any electrical or water pipes of any sort. Your second step, (with the details from step one in your possession) should be to apply for a building permit and benefit from their sound advice regarding deck design in your area. There is no guarantee, but if your deck is going to add any value to your home you must have your paperwork regarding the proper building permits in order. Once your permit comes through you will have permission to create an anchor ledger at the side of your home to which you can connect your deck design using masonry anchors and you will know where you can dig to place your concrete footings where your post anchors go. Get all these initial components nice and level and firmly placed and it's plain sailing for the rest of your deck design construction. [ad_2] Source by Arpad Nyikos https://1home.streamstorecloud.com/deck-design-why-firm-foundations-are-essential/?feed_id=37479&_unique_id=648f3ab7a02a9

Repairing and Renovating Decks

[ad_1] Removing stains For bad stains it may be necessary to wean the timber with an oxalic acid timber wash, which is biodegradable, so any run-off from your deck cleaning will break down naturally and rot kill all your plants! Apply the mix to the surface with a stiff scrubbing brush. After about 15 minutes it will have done the job of removing dead timber cells and the residues of old oil finishes. It will have opened up the cellular structure of the timber surface ready for a fresh intake of protective oil. Wash the acid off with water, or better still with the high-pressure cleaner. If your timber work has gone black Many people over the years have mistakenly finished their timber decking with linseed oil, thinking it will protect the timber. But linseed oil is mildew food so when used on exterior timber and exposed to moisture it will eventually turn black. Linseed oil also offers little resistance to UV and is not particularly durable for surfaces under foot. Fixing the problem is not easy: Multiple applications of a commercial timber wash product may be necessary to remove many layers of built-up linseed oil, or you can make up a solution using oxalic acid flakes purchased from a hard-ware store. Be sure to test one or two timbers before proceeding with the whole deck. As a follow-up, or if your decking only requires a light treatment, you may also consider washing all the timber work with a strongly mixed oxygen bleach solution like NapiSan. Once the deck is washed (or if you've just laid a new deck), I'd recommend that you leave it to dry out and allow the natural mildew-killing action of the sun to work on it before applying a new finish. Make your decking go 'silver' If you replace some old rotting timbers with new boards, they may not match your existing boards, which possibly will have that grey silver look from exposure to the weather. The silvered look is a result of the natural tannins that give timber its colour leaching out and washing away, leaving the surface to become sun bleached. If you don't finish the new boards at all, they won't take too long to silver off and be indistinguishable from the original boards. If you're in a hurry, this process can be accelerator by mopping the new boards with a mixture of baking soda and water. One box of baking soda to a half bucket of water should do it. If you have a whole deck you want to silver, repeated treatments of an oxalic-acid-based timber wash, followed by cleaning with high-pressure water cleaner, will help. Once the timber does form the silvered surface you're after, no further protection will be required to maintain it In much the same way as tarnish works on metal, the silvery layer of dead timber cells provide a protective surface for the timber below, Don't be tempted to oil that surface or it will just turn it black. From time to time you can reapply the timber cleaner with a stiff scrubbing brush to keep the surface from becoming too rough. Making your silvered deck look new! To return deck timber to its original c dour, the deck can be sanded in the same way as a timber floor: 1 - Make sure you clean the deck really well, and remove all the debris that's collected in the cracks. 2 - Then make sure all nail heads are embedded below the surface with a nail punch and hammer, or the sandpaper will catch and tear. 3 - Use a belt sander if its a small deck, or hire a floor sander if it's large. Begin sanding across the wood's grain with a coarse belt, then diagonally with a medium belt, and finish with a fine belt going with the grain. 4 - Once the deck is sanded it can be left to silver off again evenly if you like that look, or you can use the opportunity to apply tinted decking oil. Refinishing the deck Keeping the coatings up to your deck is your best defence against its early demise. There are many choices of finish available, from clear oils to opaque acrylic paints. As you'll know by now if you've read the rest of this book, I'm a great fan of oil-based products on outdoor timber as it's a natural waterproofing agent. But you should choose a product that also contains pigmentation as a UV inhibitor. Staining a treated pine deck Treated pine timbers can be stained, but for best results wait three months to a year after installing if you can. This allows any excess resins to leach out. The slightly faded timber will also give a truer colour to the stain you choose, Most of the timber finish companies consider the colour of raw treated pine in their colour sampling, and if you have a look at the colour swatches at a hardware store you'll see the different colours applied to treated pine. The best bet would be to test stain a few off-cuts for you before purchasing all the stain required. Use a tinted decking oil rather than a straight stain; it's easy to apply and will help preserve the timbers of your new deck. It's also easy to reapply to high wear-and-tear areas, like stair treads. [ad_2] Source by Brad C Parker https://1home.streamstorecloud.com/repairing-and-renovating-decks/?feed_id=37343&_unique_id=64877578ddc31

Recommendations for Routine Wood Deck Maintenance

[ad_1] Wooden patios and deck are a wonderful addition to any home or property that can be enjoyed throughout most of the year. But if you do not maintain your wood deck properly, it will begin to deteriorate quicker, leading to things like warped boards, wood rot, and moss infestations. Not only can these damages render a deck unattractive, it can make it unsafe to use too. Continue reading to learn how to properly maintenance and repair a wooded deck so that you may enjoy your wooden deck or patio all year long and for many more years to come! Common Problems With Wooden Decks It is important to regularly inspect your deck for problems so that you may solve them before they get out of control, become a hazard, or wind up being very costly to repair. A small problem can evolve into a major one over a short amount of time, which is why you must stay vigilant when it comes to routine deck maintenance and repair. Here are a few common issues to look for: Loose Nails - Replace damaged or corroded nails on floorboards, posts, sills, joists, railing, stairs, and more. Hammer down any protruding nails until they are even (or below) the wood surface. You may also replace protruding or loose nails with deck screws. Warped Floorboards - Cracked, warped, splintered, or protruding floorboards are hazards. Replace them as needed. Dry Rot - This type of fungal growth digests wood, rotting it from all over. Signs include soft or moist floorboards, musty odors, discoloration, or shrunken floorboards. Replace immediately upon discovery. Mold and Mildew - Additional types of fungal growth, like mold and mildew, are hazardous for wood decks and patios. Also, mushroom growth, moss growth, green or black algae, lichen, and more make for dangerous patio conditions. Debris - Leaves, twigs, branches, grass clippings, and more are examples of debris that needs cleared regularly from decks and patios. Accumulation can provide the perfect environment for mold and mildew growth, and more. Wood Deck and Patio Care All of the above problems, and more, should be addressed right away in order to maintain a safe and enjoyable deck or patio this summer. Nails should be hammered in or replaced with deck screws, organic growths should be sprayed with an eliminating solution, rotted or damaged floorboards should be replaced or patched, and debris should be swept away on a daily basis. All of this should prevent costly and hazardous wood deck problems. In order to preserve your wooden deck or patio, it is important to implement certain strategies and chores that will safeguard it all year long. For example, dry rot can be prevented by painting a layer or two of wood preservative underneath the bottom of the wood deck. Also, applying a quality sealcoat and deck protectant is vital for safeguarding against natural wear and tear. It is helpful to know that replacing boards with dry rot right away will evade the potential for it to spread to other boards. And last, continue to retreat your wood deck with fungal protection to keep it mold and mildew free all year. Consult a professional general contractor for advice, information, and assistance with deck maintenance and renovation. They retain the experience, knowledge, and tools to get you and your patio ready for an early spring! [ad_2] Source by Sarahbeth Kluzinski https://1home.streamstorecloud.com/recommendations-for-routine-wood-deck-maintenance/?feed_id=37013&_unique_id=646a8a9e2fe4b